DP-DCAPH-RXP-X-6S
DP-DCAPH-RXP-X/6S Bleed, Inhib, BioA, pH & ORP GPOs for opt pumps
- Internet Based Connectivity as an option
- Monitoring and control of Conductivity/TDS, pH and ORP simultaneously
- On-board data logging
- Continuous readout of Conductivity, Temp, pH & ORP with each setpoint on backlit LCD
- Display and logging of cycles of concentration of the cooling tower
- Manual slug dose feature on all pumps
- Inhibitor modes: On bleed, After bleed, 24/7 cycle, Proportional to make-up
- Ability to measure and log cooling tower make-up and bleed water flow rate & consumption
- GPO’s for Inhibitor, Non-oxidising biocide, pH, Chlorine, Bromine, & Dispersant pumps
- Disinfection feature to allow ORP control to a temporary high setpoint
- 28 Day Timers for disabling pH & ORP output if continuous control not desired.
- 28 Day Biocide Dosing programs (max 70 per week)
- Password protection
SKU: DP-DCAPH-RXP-X/6S
Categories: ORP via Chlorine Pump, ORP via Cl2 & Br Pumps
Tag: DIGICHEM Plus
Brand: DIGICHEM Plus
Description
DIGICHEM Plus+ Firmware upgrade Compatibility Rev 1.0
DIGICHEM Plus+ Tips for Remote Setup & TroubleShooting v1.0
DP-CA DIGICHEM Plus Data Sheet v1.2
DP-CA DIGICHEM Plus Instruction Manual v5.0
DP-CA DIGICHEM Plus+ Spare Parts v1.1
DP-CAPHP-RXP or similar Installation Instructions v1.1
DP-DCAPH-RXP-X-6S Assembly Diagram
| Name |
|---|
|
|
|
DIGICHEM Plus+ Firmware upgrade Compatibility Rev 1.0
|
|
DIGICHEM Plus+ Tips for Remote Setup & TroubleShooting v1.0
|
|
DP-CA DIGICHEM Plus Data Sheet v1.2
|
|
DP-CA DIGICHEM Plus Instruction Manual v5.0
|
|
DP-CA DIGICHEM Plus+ Spare Parts v1.1
|
|
DP-CAPHP-RXP or similar Installation Instructions v1.1
|
|
DP-DCAPH-RXP-X-6S Assembly Diagram
|
Additional information
| Configuration | Wall Mount, PVC Backboard Mounted |
|---|---|
| Variables Measured | Conductivity, Flow Status, Flow Volume, ORP, pH, TDS, Temperature |
| Inputs | Conductivity Probe with Electrodes & 47K NTC, Flow Switch Contact, ORP Probe, pH Probe, Water Meter Bleed Pulses, Water Meter Make-up Pulses |
| Outputs | Alarm Relay, Bleed Valve Via Relay, Switched GPOs for optional pumps/valves |
| Data Logging | Included |
| Remote Comms | Via Optional Modem |
| Max Pressure / Temp | 6.9 bar @ 25°C |
| Port Size | 20mm Solvent Weld |
| Materials | PVC Manifold, Solenoid valves brass |
| IP Rating | IP53 |
You may also like…
-
ONGA 413 Centrifugal pump 60 l/min @ 10m head
Compare -
ST-2P-P Optional System mounted to SS304 Skid, incl. ONGA 413 pump
Compare -
RV ILS-X-T20E Transparent Bowl Strainers 20 mesh (915 micron)
Compare -
CR-2C-V-PVC-A 20mm (3/4 inch) Coupon Rack
Compare -
Cold Water Meters 15mm to 32mm – ARAD Multijet
Compare
