DIGICHEM-PLUS Controller Only (pumps, probes & manifold optional) 1
DIGICHEM-PLUS Controller Only (pumps, probes & manifold optional)
- Internet Based Connectivity as an option
- Monitoring and control of Conductivity/TDS, pH and ORP simultaneously
- On-board data logging
- Continuous readout of Conductivity, Temp, pH & ORP with each setpoint on backlit LCD
- Display and logging of cycles of concentration of the cooling tower
- Manual slug dose feature on all pumps
- Inhibitor modes: On bleed, After bleed, 24/7 cycle, Proportional to make-up
- Ability to measure and log cooling tower make-up and bleed water flow rate & consumption
- Disinfection feature to allow ORP control to a temporary high setpoint
- 28 Day Timers for disabling pH & ORP output if continuous control not desired.
- 28 Day Biocide Dosing programs (max 70 per week)
- Password protection
SKU: DIGICHEM-PLUS
Categories: ORP via Brominator, ORP via Chlorine Pump, ORP via Cl2 & Br Pumps
Tag: DIGICHEM Plus
Brand: DIGICHEM Plus
Description
DIGICHEM-Plus-Firmware-upgrade-Compatibility-Rev-1.0.pdf
DIGICHEM-Plus-Tips-for-Remote-Setup-TroubleShooting-v1.0.pdf
DP-CA-DIGICHEM-Plus-Data-Sheet-v1.2.pdf
DP-CA-DIGICHEM-Plus-Instruction-Manual-v5.0.pdf
| Name |
|---|
|
|
|
DIGICHEM-Plus-Firmware-upgrade-Compatibility-Rev-1.0.pdf
|
|
DIGICHEM-Plus-Tips-for-Remote-Setup-TroubleShooting-v1.0.pdf
|
|
DP-CA-DIGICHEM-Plus-Data-Sheet-v1.2.pdf
|
|
DP-CA-DIGICHEM-Plus-Instruction-Manual-v5.0.pdf
|
Additional information
| Configuration | PVC Backboard Mounted |
|---|---|
| Variables Measured | Conductivity, Flow Status, Flow Volume, ORP, pH, TDS, Temperature |
| Inputs | Conductivity Probe with Electrodes & 47K NTC, Flow Switch Contact, ORP Probe, pH Probe, Water Meter Bleed Pulses, Water Meter Make-up Pulses |
| Data Logging | Included |
| Remote Comms | Via Optional Modem |
| IP Rating | IP65 |
