EMEC KMF Digital Pump - Constant/Proportional with Multifunction
PMMA Head for EMEC KA Series Pumps
EMEC KAMF Digital Multi Function Chlorine Pumps (3.5 l/hr to 7.5 l/hr)
- Includes Installation Kit, i.e. foot valve, injection valve, 2m of Suction tube and 2m of Delivery tube
- Programmable Modes: Constant, Pulse with Multiply/Divide, PPM, Percentage, Batch, Volt, mA
- Degassing (self-venting) PVDF or PMMA head
- Adjustable stroke length (10-100%)
- Backlit LCD Display of Strokes/Min, L/HR, PPM, etc
- Optional SEFL Flow Switch alarms if pump loses prime
- Programmable alarm relay output
- Pump enable/standby input
- Float on foot valve stops pump dosing when chemical level in tank is low
- Double ball check valves in foot valve, suction & deliver valves
- Long lasting Solid Teflon diaphragm
- Reliable & accurate dosing
- Wall Mount with optional Front or Side Mount Bracket
- Alternate code: EMEC KMSAMF
- TIP: see available Models / Part Numbers below
Description
EMEC Chemical Compatibility Table April 2013
EMEC KAPLUS_KAMF 1035_1801_0855_0575 PMMA CLO2 Spare Parts Exploded Rev 02
EMEC KAPLUS_KAMF 1503 FP Spare Parts Exploded Rev 01
EMEC KMF-KAMF Data Sheet R1-11-15
EMEC KMF-KAMF Instruction Manual R1-01-17
Quick_guide_KCO_KCL_PLUS
| Name |
|---|
|
|
|
EMEC Chemical Compatibility Table April 2013
|
|
EMEC KAPLUS_KAMF 1035_1801_0855_0575 PMMA CLO2 Spare Parts Exploded Rev 02
|
|
EMEC KAPLUS_KAMF 1503 FP Spare Parts Exploded Rev 01
|
|
EMEC KMF-KAMF Data Sheet R1-11-15
|
|
EMEC KMF-KAMF Instruction Manual R1-01-17
|
|
Quick_guide_KCO_KCL_PLUS
|
Additional information
| Configuration | Foot Mount, Wall Mount with Optional Bracket |
|---|---|
| Variables Measured | Level |
| Inputs | 4-20mA, Pulse, SEFL Flow Sensor, Standby Dry Contact, Tank Level Dry Contact, Water Meter Make-up Pulses |
| Outputs | Alarm Relay |
| Process Connection | 1/2 inch BSP Male |
| Materials | Ceramic Balls, FKM B O-rings & Seats, PMMA Acrylic Transparent Head, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies |
| Max Viscosity | 100 cps |
| IP Rating | IP65 |
| Install Kit Included | 4x6mm tube (<12 l/hr) or 6x8mm tube (12 l/hr or more), injection valve & foot valve with level float |
| Optional Tube Size | 1/4 inch, 3/8 inch, 5×8 or 6x9mm |
Models / Part Numbers
- EMEC KAMF 10 3.5 PMMA for max 3.5 l/hr @ 10 bar (PMMA degassing head)
- EMEC KAMF 08 5.5 PMMA for max 5.5 l/hr @ 8 bar (PMMA degassing head)
- EMEC KAMF 05 7.5 PMMA for max 7.5 l/hr @ 5 bar (PMMA degassing head)
You may also like…
-
LDPE (Polyethylene) Tubing
Compare -
PVC (soft) Tubing
Compare -
EMEC ST-K Wall mount bracket for K Series Dosing Pumps (Side Mount)
Compare -
Cold Water Meters 15mm to 32mm – ARAD Multijet
Compare -
EMEC LASP Suction Lance with Single Float
Compare -
EMEC LINRV/K Injection Lance PVDF FP
Compare -
EMEC MFKTS Multi-function (Anti Syphon) valve – Wall Mount
Compare -
EMEC SEFLS Dosing Pump Delivery Line Flow Switch (Wall Mount)
Compare
