EMEC AMSPLUS Pump - Constant/Proportional Dosing
EMEC AMSAPLUS Constant/Pulse/mA Mode Chlorine Pumps (6 l/hr to 30 l/hr)
- Includes Installation Kit, i.e. foot valve, injection valve, 2m of Suction tube and 2m of Delivery tube
- Selectable Modes: Constant, Pulse with Multiply/Divide, mA
- Degassing (self-venting) PMMA head for Chlorine
- Adjustable stroke length (10-100%)
- Float on foot valve stops pump dosing when chemical level in tank is low
- Double ball check valves in foot valve, suction & deliver valves
- Long lasting Solid Teflon diaphragm
- Reliable & accurate dosing
- Simple mounting with optional Front or Side Mount Bracket
- TIP: see available Models / Part Numbers below
Description
EMEC AMSAPLUS_AMSAMF 0330 PMMA Spare Parts Exploded Rev 01
EMEC AMSAPLUS_AMSAMF 0713 PMMA Spare Parts Exploded Rev 01
EMEC AMSPLUS-AMSAPLUS-AMSCOPLUS Data Sheet R1-07-15
EMEC AMSPLUS-AMSAPLUS-AMSCOPLUS incl LPV Instruction Manual R1-11-13
EMEC Chemical Compatibility Table April 2013
| Name |
|---|
|
EMEC AMSAPLUS_AMSAMF 0330 PMMA Spare Parts Exploded Rev 01
|
|
EMEC AMSAPLUS_AMSAMF 0713 PMMA Spare Parts Exploded Rev 01
|
|
EMEC AMSPLUS-AMSAPLUS-AMSCOPLUS Data Sheet R1-07-15
|
|
EMEC AMSPLUS-AMSAPLUS-AMSCOPLUS incl LPV Instruction Manual R1-11-13
|
|
EMEC Chemical Compatibility Table April 2013
|
Additional information
| Configuration | Foot Mount, Wall Mount with Optional Bracket |
|---|---|
| Variables Measured | Level |
| Inputs | 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses |
| Process Connection | 1/2 inch BSP Male, 3/4 inch BSP Male |
| Materials | Ceramic Balls, FKM B O-rings & Seats, PMMA Acrylic Transparent Head, PTFE Diaghragm/s |
| Max Viscosity | 100 cps |
| IP Rating | IP65 |
| Install Kit Included | 4x6mm tube (<12 l/hr), 6x8mm tube (20 l/hr) or 8x12mm tube (>30 l/hr), injection valve & foot valve with level float |
| Optional Tube Size | 3/8 inch, 1/2 inch, 5×8, 6×9 or 9x12mm |
Models / Part Numbers
- EMEC AMSAPLUS 15 06 PMMA for max 6 l/hr @ 15 bar (PMMA degassing head)
- EMEC AMSAPLUS 10 10 PMMA for max 10 l/hr @ 10 bar (PMMA degassing head)
- EMEC AMSAPLUS 07 13 PMMA for max 13 l/hr @ 7 bar (PMMA degassing head)
- EMEC AMSAPLUS 03 30 PMMA for max 30 l/hr @ 3 bar (PMMA degassing head)
You may also like…
-
EMEC Pumps Maintenance / Service Kits
Compare -
EMEC ST-A Wall mount bracket for AMS/CMS Dosing Pumps (Side Mount)
Compare -
PVC (soft) Tubing
Compare -
EMEC LINRV/K Injection Lance PVDF FP
Compare -
Cold Water Meters 15mm to 32mm – ARAD Multijet
Compare -
EMEC MFKTS Multi-function (Anti Syphon) valve – Wall Mount
Compare -
LDPE (Polyethylene) Tubing
Compare -
EMEC LASP Suction Lance with Single Float
Compare
