DP-CAPH-RXPP

DP-CAPH-RXPP (Bleed, Inhib, BioA, pH, ORP via CL2 + Br Pumps)

Convergent Water Controls | SKU: DP-CAPH-RXPP

Internet Based Connectivity as an option
Monitoring and control of Conductivity/TDS, pH and ORP simultaneously
On-board data logging
Continuous readout of Conductivity, Temp, pH & ORP with each setpoint on backlit LCD
Display and logging of cycles of concentration of the cooling tower
Manual slug dose feature on all pumps
Inhibitor modes: On bleed, After bleed, 24/7 cycle, Proportional to make-up
Ability to measure and log cooling tower make-up and bleed water flow rate & consumption
Inhibitor, Non-oxidising biocide, Chlorine & Bromine pumps. Ratio of Chlorine to Bromine is approx. 3:1.
Disinfection feature to allow ORP control to a temporary high setpoint
28 Day Timers for disabling pH & ORP output if continuous control not desired.
28 Day Biocide Dosing programs (max 70 per week)
Password protection

Specifications

Configuration

Backboard Mounted
Data Logging

Included
Inputs

Conductivity Probe with Electrodes & 47K NTC, Flow Switch Contact, ORP Probe, pH Probe, Water Meter Pulse
IP Rating

IP65
Materials

PVC Manifold, Solenoid valves brass
Max Pressure / Temp

2.7 bar @ 50°C
Outputs

Alarm Relay, Bio A Pump Via Relay, Bleed Valve Via Relay, Inhibitor Pump Via Relay, Optional Dispersant Pump Via Relay, Optional pH Pump Via Relay, ORP Bromine Pump Via Relay, ORP Chlorine Pump Via Relay
Port Size

20mm Solvent Weld
Remote Comms

Optional Modem
Variables Measured

Conductivity, Flow Status, Flow Volume, ORP, pH, TDS, Temperature