DP-DCAPH-RXB-X/4S-CAB

DP-DCAPH-RXB-X/4S-CAB (Bleed, Inhib, BioA, pH GPOs for opt pumps

Convergent Water Controls | SKU: DP-DCAPH-RXB-X/4S-CAB

Digital controller & GPO's in hinged lockable, PC ABS cabinet, mounted with manifold on separate PVC back panel
Internet Based Connectivity as an option
Continuous readout of Conductivity, Temp, pH & ORP with each setpoint on backlit LCD
Monitoring and control of Conductivity/TDS, pH and ORP simultaneously
On-board data logging
Display and logging of cycles of concentration of the cooling tower
Manual slug dose feature on all pumps
Inhibitor modes: On bleed, After bleed, 24/7 cycle, Proportional to make-up
Ability to measure and log cooling tower make-up and bleed water flow rate & consumption
GPO's for Inhibitor, Non-oxidising biocide, pH, & Dispersant pumps
Disinfection feature to allow ORP control to a temporary high setpoint
28 Day Timers for disabling pH & ORP output if continuous control not desired.
28 Day Biocide Dosing programs (max 70 per week)
Password protection

Specifications

Configuration

Controller & Pumps Mounted In Cabinet
Data Logging

Included
Inputs

Conductivity Probe with Electrodes & 47K NTC, Flow Switch Contact, ORP Probe, pH Probe, Water Meter Pulse
IP Rating

IP65
Materials

PVC Manifold, Solenoid valves brass
Max Pressure / Temp

6.9 bar @ 25°C
Outputs

Alarm Relay, Bleed Valve Via Relay, ORP Brominator Valve Via Relay, Switched GPOs for optional pumps/valves
Port Size

20mm Solvent Weld
Remote Comms

Optional Modem
Variables Measured

Conductivity, Flow Status, Flow Volume, ORP, pH, TDS, Temperature