EMEC WDPHCL Pool Controller pH & Free Chlorine (7l/hr/3b)

  • Controls levels of Chlorine (ie. ORP) & Acid (ie. pH) in Swimming Pools
  • Designed to measure ppm Chlorine, and compensate for pH, with Open Amerometric Cell (EMEC ECL6) and pH Probe (EMEC EPHS) – Sold Separately
  • Reliable & accurate dosing with self venting (de-gassing) head on Chlorine pump
  • Floats on foot valves stop pumps dosing when chemical level in tanks is low – individually controlled for Chlorine & Acid Pumps
  • Standby input stops both pumps (activated by contact closure)
  • Speed adjustment automatic (demand dependent)
  • Double ball check valves in foot valve, suction & discharge valves
  • Solid Teflon diaphragm prevents wear
  • PVDF Heads, Spring loaded injection valves with ceramic balls
  • Simple mounting
Compare
SKU: EMEC WDPHCL 0310 0307 Category: Tag: Brand:

Description

EMEC Chemical Compatibility Table April 2013
EMEC WDPHCL Data Sheet R1-12-08
EMEC WDPHCL Instruction Manual R5-07-16
EMEC Chemical Compatibility Table April 2013
EMEC WDPHCL Data Sheet R1-12-08
EMEC WDPHCL Instruction Manual R5-07-16
Name

Additional information

Configuration

Wall Mount

Variables Measured

Cl2, Flow Status, pH

Inputs

Flow Switch Contact, ORP Probe, pH Probe, Standby Dry Contact, Tank Level Dry Contact

Outputs

Alarm Relay

Remote Comms

Via Optional LAN card, Via Optional Modem

Max Flow / Pressure (Head)

10 l/hr @ 3 bar, 7 l/hr @ 3 bar

Process Connection

1/2 inch BSP Male

Materials

Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PP Head, PP Valve Bodies, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies, SS Balls

Max Viscosity

100 cps

IP Rating

IP65

Install Kit Included

4x6mm tube, 2 x injection valves & 2 x foot valves with level floats

Optional Tube Size

1/4 inch, 3/8 inch, 5×8 or 6x9mm

You may also like…

  • EMEC ERHM ORP Electrode

    EMEC ERHM ORP Electrode

    Compare
  • EMEC EPHS pH Electrode

    EMEC EPHS pH Electrode

    Compare