EMEC LDPHCL XS0SG001T Controller for SCL Amperometric Sensors

  • Programmable for dosing Acid and Chlorine
  • Proportional or On/Off Control for pH and Chlorine
  • Outputs: 1 x pH 240Vac Relay, 2 x pH Pulse, 1 x Cl2 240Vac Relay, 1 x Cl2 Pulse, 3 x mA for pH, Cl2 & Temp,
  • Tanks level inputs: 2 x pH, 1 x Cl2
  • Other I/O: 1 x Standby I/P, 1 x 240Vac Alarm Relay O/P, 1 x RS485 O/P
  • LCD display shows measured pH and Chlorine (mg/L)
  • Manual/Automatic Temperature Compensation (for pH only)
  • Max dosing alarms
  • Optional Modbus RTU, or 4G modem or Ethernet/LAN/WiFi card for remote connectivity via webserver and alarming via SMS/e-mail. Refer Models/Part Numbers tab for different variants
  • ERMES Ready – Remote access via 4G, WiFi, Ethernet with live readings
Compare

Description

Superseded
EMEC LD Dual & LD Dual PLUS Data Sheet R2-06-20
EMEC LDPHCL Instruction Manual R5-03-22
Quick_Guide_LDPHCL_PLUS
Superseded
EMEC LD Dual & LD Dual PLUS Data Sheet R2-06-20
EMEC LDPHCL Instruction Manual R5-03-22
Quick_Guide_LDPHCL_PLUS
Name
Superseded

Additional information

Configuration

Wall Mount

Variables Measured

Cl2, CLO2, Flow Status, H2O2, pH, Temperature

Inputs

Amperometric Sensor, Flow Switch Contact, pH Probe, Standby Dry Contact, Tank Level Dry Contact

Outputs

4-20mA, Alarm Relay, Optional Modbus, Pulse, Switched Relays For Optional Pumps/Valves

Remote Comms

Via Optional LAN card, Via Optional Modbus, Via Optional Modem

IP Rating

IP65

Models / Part Numbers

  • EMEC LDPHCL BS0SG001T for controller without comms options
  • EMEC LDPHCL SS0SG001T for controller with Modbus RTU card fitted
  • EMEC LDPHCL AS0SG001T for controller with 4G modem fitted

You may also like…

  • EMEC EPHS pH Electrode

    EMEC EPHS pH Electrode

    Compare
  • EMEC CA/AT Activated carbon filter cartridge

    EMEC CA/AT Activated carbon filter cartridge

    Compare