EMEC MAX5 5 Channel Controller for pH/ORP, CL2/CLO2/O3, NTU/DO/EC/Temp
- Simultaneously displays 5 parameters, with the status of each channel on the LCD Back-lit wide display screen
- Programmable: 6 x Switched 240Vac Relay outputs, and 6 x Proportional Pulse outputs
- 6 x 4-20mA outputs corresponding to all measured variables
- 5 x Tank level inputs
- Flow and Stand-by inputs
- Data output via USB or RS485 serial port
- Optional GSM/GPRS modem or Ethernet/LAN card for remote connectivity via webserver and alarming via SMS/e-mail
Description
Additional information
Configuration | Wall Mount |
---|---|
Variables Measured | Cl2, CLO2, Conductivity, DO, Flow Status, Flow Volume, H2O2, ORP, pH, TDS, Temperature, Turbidity (Offline Measurement) |
Inputs | Amperometric Sensor, Conductivity Probe with Electrodes & PT100, DO Sensor, Flow Switch Contact, Inductive Conductivity Probe & PT100, ORP Probe, pH Probe, PT100, Standby Dry Contact, Tank Level Dry Contact, Turbidity Sensor, Water Meter Bleed Pulses, Water Meter Make-up Pulses |
Outputs | 4-20mA, Alarm Relay, Optional Modbus, Pulse, Switched Relays For Optional Pumps/Valves |
Remote Comms | Via Optional LAN card, Via Optional Modbus, Via Optional Modem |
IP Rating | IP65 |