Solenoid Metering Pump

This is blog is the final part of our 4 part blog series: ‘Which EMEC Solenoid Metering Pump should I use?’ If you’d like to catch up on the past four blogs, we’ve included links for you at the bottom of this blog. In the mean time, this blog covers temperature, the temperature you will…

Not all chemicals are compatible with all chemically resistant materials. For this reason, all metering pumps have differnet options when it comes to specifying the material selection for the Liquid End. (The liquid end refers to the pump head, foot valve, injection valve and tubing, i.e. all materials which come into direct contact with this…

Our first blog in the series (missed it? catch up here) covered the Flow Rate required and Pressure you intend to pump into. Further to this, all pumps have internal timers which regulate the speed, or frequency at which the pump’s solenoid strokes. The speed is adjusted or programmed on the pump to achieve a…

The first questions to ask when selecting a Solenoid Metering Pump should be: What Flow Rate do you require and what pressure do you intend pumping into? All EMEC pumps are rated at a maximum flow rate at a maximum injection pressure (based on water at ambient temperature). For example, a KPLUS 10 05 pump’s…